return to showroom


























1974 BRONCO (restored)
1974 FOMOCO BRONCO
THIS LITTLE 74 IS NOW AVAILABLE. WHEN WE GOT IT WE DISCOVERED IT HAD THE ORIGINAL PAINT AND HAD NEVER BEEN TWEAKED,TWISTED,OR SMASHED UP. PATINA LIKE THIS ON A 74 IS VERY RARE IN THE BRONCO WORLD. WE FOUND THE ORIGINAL TITLE,BILL OF SALE, OWNER'S CARD AND OWNERS MANUAL IN THE GLOVE BOX. WHAT A SURPRISE!!! THIS IS A STUD!
THE BRONCO IS EQUIPPED WITH A REBUILT C4 AUTOMATIC, REBUILT ENGINE 302, BOSS351 CAM, 4 BARREL 550CFM HOLLEY, HEADERS, DUAL EXHAUST, LIFTED 3", BRAND NEW 3:54 LIMITED SLIP GEARS FRONT AND REAR, BRAND NEW BRAKES ON ALL 4 , BRAND NEW POWER BRAKE MODULE, POWER STEERING, K&N AIR FLOW, NEW POINTLESS IGNITOR II IGNITION WITH FLAMETHROWER COIL,ALL NEW PAINLESS WIRING THROUGHOUT, DUAL STEEL TANKS WITH 25 GALLON CAPACITY AND ELECTRIC SWITCHOVER, AND YES, IT ALL WORKS AS DESIGNED!

THE INTERIOR IS EXCELLENT AND NEW. THE ROLL CAGE IS A TIG WELDED 8 POINT, THE DASH HAS BEEN FULLY MODIFIED TO MOVE THE GLOVE BOX OVER 2 1/2", DELETE ASHTRAY,DELETE SPEAKER GRILL, NEW KENWOOD U 252 INSTALLED IN DASH, AND THE INSTALLED ALL NEW SEATING AND UPHOLSTERY. THE WINDSHIELD AND GASKET ARE BRAND NEW AS ARE THE WEATHERSTRIPS . THE WINDOWS WERE ADJUSTED AND LUBED SO THE BRONCO IS COMPLETE. BEFORE WE PUT THE NEW CARPET IN THE BRONK WE DID AN 80 GRIT SANDING AND THEN RAPTOR COATED THE ENTIRE INSIDE OF THE TUB AND TAILGATE.... LOOKS BRAND NEW UNDER THE CARPET AND THERE ARE NO SECRETS THERE.

BESIDES THE NEW GEARS AND BRAKES THE AXLE SEALS,BRAKE SEALS, AND TRANSFER CASE SEALS ARE ALL VERY RECENTLY DONE. WE DON'T SEE ANY LEAKAGE OR SEEPAGE NOW. THE BRAKE LINES ARE SS WRAPPED AND EXTENDED AS IS THE NEW REAR DRIVESHAFT. FORD FRICTION MODIFIER WAS USED FRONT N REAR ON THE LIMITED SLIP PACKAGES. WE INSTALLED 5 NEW 285-70R17 FEDERAL MUD TERRAINS AND 5 NEW RACELINE BLACK OUTS 17X9 WITH 0 OFFSET. LAYS MORE RUBBER ON THE GROUND INSIDE THE WHEEL WELL. THE FLARES ARE SET UP FOR 33'S SO THERE IS PLENTY OF ROOM FOR THE LARGER TIRES.

WE USED A STOCK BLACK BUMPER IN THE REAR BECAUSE WE REFURBISHED THE FACTORY SWING AWAY SPARE CARRIER RATHER THAN PLUG HOLES OR REPAINT OVER ORIGINAL PAINT.THE RECEIVER HITCH IS FRAME MOUNTED. WE WENT TO A PRE-RUNNER FRONT POWDER COATED FREIGHTLINER BLACK AND A SMITTYBUILT XRC 8000 # WINCH WITH REMOTE.THE PRO-COMP 100W LIGHTING IS FOR LOADING OR TRAIL RIDING AT NIGHT.THE ROCK SLIDERS ARE FROM TOM'S BRONCO PARTS AND ARE MOUNTED WITH NUT SERTS AND NOT SHEET METAL SCREWS MAKING THEM USEFUL AS STEPS AND ROCK GUARDS. THEY WERE POWDER COATED THE SAME PLACE AS THE BUMPERS IN FREIGHTLINER SOFT BLACK. WE'LL PROBABLY ADD A FIRE EXTINGUISHER.
AS IT STANDS WE HAVE A BRAND NEW BEST TOP SOFT TOP MOUNTED AND BRACED CORRECTLY AS THE ONLY TOP. WE HAVE A HARDTOP AVAILABLE WITH NEW HEADLINER AND PAINT FOR EXTRA DUCKETS. MOST PEOPLE SEEM TO THROW THE HARDTOPS INTO THE GARAGE AND NEVER PUT THEM BACK ON.
THIS BRONCO IS AVAILABLE FOR IMMEDIATE PURCHASE BEFORE IT GOES ON EBAY TUESDAY NOVEMBER 11,2014 AT 5:00pm
PLEASE CALL MARTY OR MOLLY AT 503 793 0204 TO INSPECT OR PURCHASE. GOOD LUCK
Questions or Comments?
Email us at contact@em2cool.com
call us at: (503) 793-0204
or drop us a note to the right!
Your Name:
Your Email:
© 2010-2013 EM2 Restorations, Inc. | PO Box 3069 Clackamas, OR 97015 | (503) 793-0204
restorations | current | completed | contact